Login with Facebook
Sponsored Advertiser - PoolMarketing.com® Network
A pool skimmer diverter is not always necessary, and most pool owners aren’t even aware of its existence. Nevertheless, they are useful for helping keep the pool water clean and controlling the pool water temperature through circulation. Should I use a pool skimmer diverter in my swimming pool? “you might wonder. The answer will depend…
A pool skimmer diverter is not always necessary, and most pool owners aren’t even aware of its existence. Nevertheless, they are useful for helping keep the pool water clean and controlling the pool water temperature through circulation. Should I use a pool skimmer diverter in my swimming pool? “you might wonder. The answer will depend on a few factors.
It is a useful tool to have attached to your pool skimmer. A pool skimmer diverter is just a disc that goes into the skimmer and modifies how the pool water flows once connected. It allows you to have more control over the pool water flow by diverting water from the skimmer or floor drain to the pump.
Water can be pumped into the skimmer from either your pool’s bottom or top or the bottom section. There are normally two openings under the skimmer basket. The pump and filter lines are connected to one hole, while the main drain is at the bottom of the water. The pores help in regulating the pool water’s suction and circulation.
A circular device called a pool skimmer valve lies on top of these two openings. On above-ground pools, it’s usually a small pipe with three holes that sits beneath the skimmer. It features its own opening that you can cover completely or partially.
A switch or lever on a pool skimmer diverter regulates which flow is open. Often, all of the pipes will be open. However, you can partially close it or turn it off, depending on your goals.
Pool skimmer diverters are a crucial aspect of your pool system, despite the fact that they are frequently overlooked. You can get them for around $40-$50 at your local pool store.
If it isn’t circulated properly, your pool’s water will become a cesspit of debris and algae. A pool skimmer diverter’s main function is to direct pool water flow to different parts of the pool system. Depending on your needs, the diverter lets you suction water from either the top or bottom of the pool.
For instance, are there a lot of leaves floating on top of your pool water? If so, it is best to set the majority of the suction from the top of the pool. On the flip side, if you use a pool flocculant, make sure the suction is coming from the pool’s bottom part to collect all the clumped particles at the bottom.
Some diverters let you close and open the valve partially or fully, while others feature less functionality. In addition, you can get pool skimmer diverters with two-way or three-way valves.
Pool skimmer valves serve a variety of purposes and are ideal for most pools. They’re particularly handy if your pool water is continually growing algae.
A 2-way pool skimmer diverter is a common type found in pool stores. They’ll attach the pool skimmer and direct water flow between it, the pool pump, and the main drain. The disadvantage of these valves is that they do not allow you to control how much pool water is pumped from each source.
These operate similarly to a 2-way valve, but they have a connection port that connects to the skimmer pipes and the main drain. 3-way valve pool skimmer diverters are far more beneficial since they allow you to switch the water flow from the drain or the skimmer. Unless your pool does not have a bottom drain, it is best to go for a 3-way port instead of a 2-way port.
You can use pool skimmer diverters in both above-ground and inground pools. Because above-ground pools rarely have a bottom drain, you’ll need to use a 2-way valve. On the other hand, an inground pool will nearly always have a 3-way valve.
In any pool, it is important to use a pool skimmer diverter. They are inexpensive and user-friendly. Having the ability to direct the water circulation in your pool is a useful skill, even if you don’t use it very often.
Take a peek at the water in your pool. You can modify the circulation to strengthen the skimmer pump if the flow at the top of the water isn’t strong enough to remove all floating debris. You can also alter the water flow to draw water from the main drain if debris and algae are clinging to the pool floor.
A pool diverter valve should be used by any pool owner who has trouble with algae infestations in specific pool regions. They’ll aid with the management of impurities and provide you with more control over the water in your pool. And it’s something that can always be improved.
On numerous occasions throughout my career, we’ve seen pool owners who have never heard of a pool skimmer diverter on numerous occasions throughout my career. So don’t be concerned if you have no idea how to use one! The device is quite easy to operate. It’s also a really useful tool that will make maintaining your pool much easier for you.